HOLIDAY SALE – 30% OFF SITEWIDE
FREE SHIPPING ON ALL ORDERS
What type of batteries does the Evolv (BP7000) use? Is it compatible with Omron’s AC Adapter? The monitor uses four “AAA” alkaline batteries.
The monitor uses four “AAA” alkaline batteries. It operates only on four “AAA” batteries and is not compatible with an AC Adapter.
Apply the cuff to your upper left arm with the Start/Stop button positioned facing toward your body.
Use the same arm when measuring your blood pressure each time because values can vary between your arms. Consult your doctor if values differ substantially.
Yes, the monitor holds 100 readings. However, only the most current reading is displayed on the monitor. After you take your measurement, remove the cuff and record your SYS/DIA and Pulse readings along with the time and date.
Please refer to our device compatibility matrix.
If the monitor is connected successfully to the smart device, “OK” will appear on the display.
Go to the Profile section and add the device in “Manage devices”.
The date and time will automatically set when you pair your blood pressure monitor to the Omron Connect app. If you are using an app other than the Omron Connect app, the date and time will not be set. We recommend using the Omron Connect app and transferring data so measurements moving forward will have the correct date and time.
The Evolv blood pressure monitor stores 100 readings. When the monitor memory reaches 100 readings, your new readings will automatically overwrite the stored readings. To help ensure you are able to access all of your history, you need to pair your monitor to your smart device and use the Omron Connect app to view your measurements. The Omron Connect app will store an unlimited number of readings.
Once you have positioned the cuff correctly on your left upper arm, simply press the Start/Stop button and the arm cuff will start to inflate and take your measurement.
As soon as your measurement is complete, tap the “sync” icon in the Omron Connect app on your smart device to transfer your readings. If your readings are successfully transferred to your smart device, “OK” will flash on your monitor’s display.
Yes, open the Omron Connect app on your smart device and press the “Sync” button in the app to transfer your readings. If your readings have successfully transferred, “OK” will flash on the blood pressure monitor’s display.
Push the Start/Stop button to turn the monitor off. The monitor will automatically turn off after 2 minutes.
Once you send your readings to the app, they cannot be sent again to the app or another smart device.
To allow other people to use this blood pressure monitor, make sure to transfer all of your readings to your Omron Connect app account so there are no readings left in the blood pressure monitor memory.
People sharing this blood pressure monitor will need to create their own Omron Connect account. Once the other person has their own Omron Connect account created, they can then take their blood pressure measurement using this device, and transfer their readings to their Omron Connect account.
Your Evolv blood pressure monitor, excluding batteries, has a limited warranty of five years. See instruction manual for further detail.
You can take approximately 300 readings with new alkaline batteries.
The blood pressure monitor may not be in the transmission range of your smart device. Move the monitor within 16 ft. (5 m) of your smart device and try again.
The date and time on your blood pressure monitor were not set when your reading was taken. If the date and time are not set when you take a reading, the reading may not transfer to the app correctly.
The Bluetooth® feature on your smart device is turned off. Turn on the Bluetooth feature on your smart device and try sending the data again.
The Bluetooth® feature on your blood pressure monitor may be turned off. Turn on the Bluetooth feature on your blood pressure monitor by holding the “sync” button down for more than 10 seconds. Release the button when “on” starts to blink on your blood pressure monitor’s display.
The blood pressure monitor did not pair successfully to the smart device. Try to pair the monitor again. Confirm that your smart device is compatible by referring to the device compatibility matrix.
The application on the smart device is not ready. Check the application then tap “Sync” on the app, and try sending the data again. If the error symbol still displays after checking the application, contact customer service.
If you restored this Evolv blood pressure monitor to its original settings, your blood pressure monitor will no longer be paired to the Omron Connect app and your readings will not transfer.
To clear this monitor from your smart device and enable it to re-pair again, First go to your smart device “Settings/Bluetooth” section and then choose “Forget this Device.”
You will then need to re-pair your blood pressure monitor by holding down the “sync” button on your blood pressure monitor until the flashing “P” shows on the display. Next, open the Omron Connect app and continue to follow the pairing instructions on the app.
To help prevent someone else from opening the Omron Connect app on your phone and seeing your data, please change your password on your Omron Connect app when you first open the app on your new phone.